1 Micron Jumbo Pleated Sediment Filter - BC10P1
Jumbo Carbon Block Filter to fit inside BH10W Whole House Filtration Housing
Easy to install and use
Filter Type - Pleated - 10" x 4.5"
Fits in - BH10W Jumbo Housing Unit
Removes - Dirt, Sand, Sediment, Rust
Micron Rating - 1 Micron
Flow Rate - 18L/min
Min/Max Temperature - 4 - 50
Min/Max Pressure - 60psi
Micron Rating - 5 Micron
Capacity - 40,000L
Recommended Service Life - 6 Months
Can be run alone or in line with other jumbo housing/cartridges.
Basic Install Instructions for BH10W which is the housing for the BC10 range.
- see instruction manual for more details
1. Prepare: Turn off the main water supply & open a tap to release pressure
2. Plan and Position: Find a good spot near the main water line & make sure there's room for the unit and future maintenance.
3. Cut and Connect: Measure and cut the water pipe, use tape on threads, then connect fittings carefully.
4. Mount: Securely attach the unit to the wall. Keep it level and aligned with the pipe
5. Connect Pipes: Attach the cut pipe to the unit's inlet and outlet. Check for leaks and tighten if needed.
6. Test and Flush: Turn on the main water supply. Check for leaks and flush out air and debris.
7. Install Filter: Follow the manual to put in the filter cartridge(s).
8. Final Check: Look for leaks and fix if any. Make sure the unit works properly.
Enjoy clean water throughout your home!
Compatible products
Discover related products and replacement parts. We have full parts available, contact us for more.